Grote boosdoener bij de opname van geluid is heel vaak de wind. Daarom verkoopt Art & Craft windkapjes in alle vormen en kleuren. Daarnaast vind je bij ons ook shockmounts, sticky pads om dasspeld microfoons te bevestigen en nog veel meer.
The Lav-Headset is an ergonomic headset-style wearable mount for a RØDE lavalier, allowing the microphone to be worn close to the mouth for optimal audio performance. Engineered from spring steel that has been plated for lifelong durability, the Lav-Headset is designed to hold its shape even with rigorous use. Integrated cable management at the rear of the mount ensures that the microphone cable is tightly secured and provides strain relief. The Lav-Headset is available in three sizes to comfortably accommodate a range of head sizes. As a general guide, the Large size is suitable for adults (18 years and over) Ergonomic headset mount for RØDE lavalier microphones Engineered from highly durable spring steel Integrated cable management Available in Junior, Medium or Large sizes
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3-pin XLR with P48 phantom power. MiCon connector for standard 3-pin XLR devices
The Tripod is a collapsible mini tripod designed for mounting lightweight microphones, cameras or accessories that support either 1/4-inch or 3/8-inch mounting. It provides 360-degree rotation and a wide angle of vertical adjustment. The tripod stand is fitted with a 1/4-inch thread and ships with a 3/8-inch thread adaptor for use with most standard mic clips. Collapsible mini tripod for mounting microphones and other devices 1/4-inch thread, supplied with a 3/8-inch thread adaptor
The Boompole Bag is a high-quality neoprene carry bag designed to accommodate a boompole with shock mount and microphone attached for easy transport. High-quality neoprene carry bag Accommodates a boompole, shock mount and microphone
The DeadCat VMPR is a high-performance windshield for the RØDE VideoMic Pro. Designed for use in windy recording environments, it features high-quality artificial fur that is acoustically transparent. High-performance windshield for the RØDE VideoMic Pro Acoustically transparent synthetic fur
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon 3-metre cable is shielded and reinforced with heavy-duty Kevlar. Cable for use with the MiCon connector system 3m (10') or 1.2m long Black (also comes in pink)
The WS11 is an easy-to-use high-performance windshield for the VideoMic NTG. Designed to for use in windy recording environments, the WS11 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber grip system prevents any wind noise from entering the rear of the microphone pickup area.
The DeadCat VMP+ is a high-performance windshield for the RØDE VideoMic Pro+. Designed for use in windy recording environments, it features high-quality artificial fur that is acoustically transparent. High-performance windshield for the RØDE VideoMic Pro+ Acoustically transparent synthetic fur
The DeadCat is a high-performance windshield for the RØDE VideoMic. Designed for use in windy recording environments, it features high-quality artificial fur that is acoustically transparent. High-performance windshield for the RØDE VideoMic Acoustically transparent synthetic fur
The Micro Boompole is a precision-balanced boompole that offers excellent performance with a convenient and portable form factor. Providing a reach of 2.1 metres, with an ergonomic grip, intuitive lock/release system, and precision-balanced anodized aluminium construction with a total weight of just 396 grams, it's ideal for a wide range of filmmaking scenarios, pairing particularly well with RØDE VideoMics. Compact and lightweight boompole Precision-balanced and lightweight design 2m (6.5') reach Easy-to-use lock/release mechanism
De Røde Invisilav is ontworpen om lavalier microfoons subtiel te kunnen verbergen. De zachte constructie absorbeert bijgeluiden en vibraties, terwijl het wijde en platte profiel zich van de externe elementen ontdoet en zorgt voor een zeer veelzijdige toepassing. De Invisilav wordt geleverd met bevestigingsmateriaal, dat zich eenvoudig hecht aan zowel stof als huid. Daarnaast zijn ze gemaakt van medisch huidvriendelijk materiaal, waardoor deze bij iedereen irritatie vrij is toe te passen.
The WS6 is a high-performance windshield for shotgun microphones. Designed for use in windy recording environments, the WS6 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area. Suitable for the RØDE NTG1, NTG2, NTG4 and NTG4+ as well as any shotgun microphone with a maximum slot length of 160.5mm and a diameter of 21-22.5mm. High-performance windshield for RØDE shotgun microphones Compatible with any shotgun microphone with a maximum slot length of 160mm and a diameter of 21-22.5mm Suitable for NTG1, NTG2, NTG4 and NTG4+ shotgun microphones Acoustically transparent synthetic fur Easy to fit and remove
The WS7 is a high-performance windshield for the RØDE NTG3 and other compatible shotgunmicrophones. Designed for use in windy recording environments, the WS7 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area. High-performance windshield for RØDE NTG3 Compatible with any shotgun microphone with a maximum slot length of 186mm and a diameter of 19-20mm Suitable for the NTG3 shotgun microphone Acoustically transparent synthetic fur Easy to fit and remove
The SM4-R is a suspension shock mount for mounting RØDE shotgun and small-diaphragm studio microphones onto a stand or boompole with 3/8-inch or ⅝-inch thread. The SM4-R is equipped with dual Rycote® Lyre® mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit the complete range of compatible RØDE shotgun microphones, and an integrated cable management clip. Premium shock mount for shotgun and small-diaphragm condenser microphones Includes angle adjustment
The PG2-R is a professional-grade pistol grip designed for using shotgun microphones and other compatible microphones in handheld applications. It features dual Rycote® Lyre® mounts to ensure maximum isolation from handling vibrations, four possible mounting points to suit the complete range of compatible RØDE shotgun microphones, and an integrated cable management clip.The PG2-R is lightweight and extremely comfortable. The grip houses multiple cable mounting points, with a dedicated space for the PG2-R Pro Cable to terminate flush with the base for easy connection to an XLR cable. It also features a heavy-duty locking nut for adjusting the angle of the microphone and a 3/8-inch thread on the base for attaching the grip to boompoles and microphone stands. Professional-grade pistol grip for shotgun microphones Dual Rycote® Lyre® mounts for maximum isolation from handling noise Lightweight and extremely comfortable Easy connectivity with XLR cables using PG2-R Pro Cable
The Mini Boompole is a high-quality professional boompole that is compact and lightweight, making it highly convenient for location recording. The Mini Boompole allows you to mount your microphone securely and swivel it in a range of directions to easily follow your sound source. It weighs just 580 grams and has a reach of 2 metres. Lightweight aluminium construction 2m (6.5') reach Ultra-smooth extension and retraction system Easy-to-use lock/release mechanism
The Micro Boompole Pro is a unique, modular boompole that allows location sound engineers to capture audio in confined or difficult spaces. Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine for a maximum reach of 2.2 metres. Using an industry standard 3/8” thread, additional sections can also be used to extend the Micro Boompole Pro to reach to over 3.7m (12'). Ultra-lightweight modular boompole 2.2m (7.2') reach, extendable to 3.7m (12') Optimised for VideoMicro
The Boompole is a precision-balanced professional boompole for location recording. Machined from high-grade, lightweight aluminium, the Boompole allows you to mount your microphone securely and swivel it in a range of directions to easily follow your sound source. It has a reach of 3.3 metres and weighs 980 grams. Lightweight professional boompole 3m (10') reach Ultra-smooth extension and retraction system Easy-to-use locking mechanism
The Blimp is the ultimate windshield and shock mounting system for RØDE shotgun microphones, as well as any third-party shotgun microphone up to 325mm in length. It features a Rycote® Lyre® suspension system for superior isolation from handling noise, plus an ultra-lightweight and ergonomic handle. Housed inside the grip is a heavy-duty Mogami® cable that splits via a junction box to a flexible thin cable inside the Blimp, which minimise the transference of vibration to the microphone. The Blimp attaches to any standard boompole with a 3/8-inch thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole. The Dead Wombat windshield, caring brush and tail/patch cable are included. Complete windshield and shock mount system for shotgun microphones Rycote® Lyre® suspension system for superior isolation from handling noise Ultra-lightweight design Attaches to any standard boompole 10-year warranty (no registration required)
Trustpilot
