Statiefkoppen

De Zhiyun Crane 4 Combo komt met de Zhiyun Sling Grip en Polssteun. 1/4"-20 montageschroefdraad met rozetten aan weerszijden van de gimbalbasis maken het mogelijk om de meegeleverde sling grip te bevestigen. Draai en pas aan om de Crane 4 in sling- of tweehandige stand te houden. Bevestig de polssteun aan de ongebruikte rozet en zet hem in de meest ergonomische positie om de pols minder te belasten.

De Zhiyun Crane 4 combineert een vertrouwde vormfactor met een lichtgewicht ontwerp en introduceert nieuwe functies voor verbeterde opnamemogelijkheden. De langere armlengte en sterkere motoren zorgen voor compatibiliteit met DSLR, spiegelloze en compacte cinema camera's, zelfs met full-frame objectieven bevestigd. Ondanks een gewicht van slechts 1.63 kg kan de Crane 4 camera's ondersteunen zoals de Canon EOS 5D Mark IV, Blackmagic Pocket Cinema Camera 6K Pro, Nikon Z8, Panasonic LUMIX S1H en Sony a7S III met full-frame lenzen.

MHXPRO-BHQ6 Manfrotto XPRO Ball Head with Top Lock MHXPRO-BHQ6

MHXPRO-BHQ2 Manfrotto XPRO Ball Head with 200 PL Platte MHXPRO-BHQ2

The X-PRO 3-Way Head is Manfrotto’s most compact, precise and reliable 3-way photographic head. The compact closed size that makes the X-PRO so easy to pack and carry is down to its retractable levers that can be extended when needed. With the levers retracted and folded for transport, the space occupied by the head is only 13cm x 13.5cm x 13.5cm (5.1” x 5.3” x 5.3”). Friction controls on the X-PRO 3-Way Head’s tilt and portrait axes help balance the weight of camera equipment so that fine framing adjustments can be made with the locking knobs open, only locking everything down once everything’s ready. And with 3 leveling bubbles on the head, composition can be levelled precisely in-camera, reducing post production work. Sturdily built with a rugged aluminium body for reliability and durability, the X-PRO supports up to 8 kg (17.6 lbs), but weighs only 1 kg (2.2 lbs). The X-PRO 3-Way Head is made in Italy by Manfrotto.

The new XPRO fluid head is be the best choice for photographers wanting to start shooting videos to expand their creativity. It’s also the best fit for birdwatchers who are using lightweight scopes to observe wildlife and digiscoping through an additional camera and need fluid heads that move constantly. The XPRO fluid head is the only lightweight video head with fluidity selector: this makes it possible to switch between hard and soft fluidity according to the preferred speed of tilt movement and to the kind of gear used. Its fluid cartridge settings ensure stable videos can be made with any photo lens. Its AdaptoTechnopolymer and Aluminum body make the XPRO fluid head extremely easy to carry: weighing a mere 0.7 kg and supporting up to 4 kg of payload, it introduces a new design approach that enhances video head transportability. The new MHXPRO-2W comes with the Manfrotto 200 pl plate, the most widespread photographic plate, which guarantees a quick setup and a quick switch from photo to video. The XPRO fluid head is made in Italy by Manfrotto.

Volledig vlotte controle tijdens het filmen dankzij de variabele vloeistof mechanismen. Ideaal voor het nieuwste camcorder en HDSLR camera's. Met vlakke basis Specificaties : 360° rotatie Plaattye 504PLONG Snelkoppeling 4 kg draagkracht 1.6 kg gewicht 13 cm hoog

Manfrotto 808RC4 STANDARD 3-WAY HEAD   The 808RC4 streamlines our range of 3-way heads by incorporating new elements while maintaining all the features you loved. There are two balance springs in the vertical tilt (forward/backward) and horizontal tilt (left/right) movements. These springs enable you to more comfortably handle heavier camera loads (such as very long lenses) with minimal effort. Both springs can be turned off in case normal head operation is required. The head is comprised of aluminium and designed in a manner to support up to 8kg yet lightweight and small enough to pack in any camera kit. The standard quick release system is used to accommodate larger camera platforms which incorporates dual axis bubble levels to achieve level shots. ·          attachment (bottom)   3/8 female thread   ·          color   black   ·          front tilt   -30° / +90°   ·          height   15.6   ·          lateral tilt   -30° / +90°   ·          load capacity   8   ·          material   aluminum   ·          panoramic rotation   360   ·          plate type   quick release - with 1/4-20 and 3/8 screws   ·          quick release   yes   ·          secondary safety system   yes   ·          weight   1.39   Manfrotto 808RC4 STANDARD 3-WAY HEAD

Half ball for levelling video heads on Video tripods provided with 75mm bowl.

Extremely compact, this unique head offers gear movement in three directions, pan, tilt and side to side tilt. The head incorporates a quick release camera plate system and is suitable for 35mm SLR and medium format cameras. Type Statiefkop Gewicht 1.22 kg Hoogte 13 cm Draagkracht 5 kg

Speed and digital precision are paramount in the latest 405 Pro Digital Geared Head, the 405 provides ideal support and fast, pinpoint positioning for professional medium format cameras with conventional or digital backs. The 405 Pro Digital Geared Head was designed specifically to meet the more exacting, time-sensitive needs of busy professional digital photographers who shoot with medium format or 35 mm camera/back with payloads up to 7.5 Kg. It utilizes large, easy-to-grip knobs that provide smooth, positive, geared control through 360° pan and +90° -30° frontal and lateral tilt. In addition to its 3-D geared functions, the 405 also incorporates a unique feature that allows you to instantly disengage the gears and rough position the camera by hand, then instantly reengage them for ultra-precise final alignment. Patented. Type Statiefkop Gewicht 1.6 kg Hoogte 16 cm Draagkracht 7.5 kg