Een statiefkop zorgt ervoor dat je bewegingsvrijheid hebt terwijl je camera op een statief staat. Er zijn verschillende soorten statiefkoppen. Zo heb je balhoofden, 2-weg statiefkoppen, 3-weg statiefkoppen en panoramastatiefkoppen.
MHXPRO-BHQ6 Manfrotto XPRO Ball Head with Top Lock MHXPRO-BHQ6
Extremely compact, this unique head offers gear movement in three directions, pan, tilt and side to side tilt. The head incorporates a quick release camera plate system and is suitable for 35mm SLR and medium format cameras. Type Statiefkop Gewicht 1.22 kg Hoogte 13 cm Draagkracht 5 kg
Finely machined for greater positioning with smooth, certain action. Three built-in spirit levels for horizontal and vertical control. The head has a quick release camera plate with secondary safety catch for added security. Camera attachment: 1/4' plus 3/8' screw. Optional Plates: 030-38, 030ARCH-14, 030ARCH-38, 030HAS, 030L, 030UNIV, 030VHS-38, 130-14, 130-38.
Manfrotto 808RC4 STANDARD 3-WAY HEAD The 808RC4 streamlines our range of 3-way heads by incorporating new elements while maintaining all the features you loved. There are two balance springs in the vertical tilt (forward/backward) and horizontal tilt (left/right) movements. These springs enable you to more comfortably handle heavier camera loads (such as very long lenses) with minimal effort. Both springs can be turned off in case normal head operation is required. The head is comprised of aluminium and designed in a manner to support up to 8kg yet lightweight and small enough to pack in any camera kit. The standard quick release system is used to accommodate larger camera platforms which incorporates dual axis bubble levels to achieve level shots. · attachment (bottom) 3/8 female thread · color black · front tilt -30° / +90° · height 15.6 · lateral tilt -30° / +90° · load capacity 8 · material aluminum · panoramic rotation 360 · plate type quick release - with 1/4-20 and 3/8 screws · quick release yes · secondary safety system yes · weight 1.39 Manfrotto 808RC4 STANDARD 3-WAY HEAD
MHXPRO-BHQ2 Manfrotto XPRO Ball Head with 200 PL Platte MHXPRO-BHQ2
The new XPRO fluid head is be the best choice for photographers wanting to start shooting videos to expand their creativity. It’s also the best fit for birdwatchers who are using lightweight scopes to observe wildlife and digiscoping through an additional camera and need fluid heads that move constantly. The XPRO fluid head is the only lightweight video head with fluidity selector: this makes it possible to switch between hard and soft fluidity according to the preferred speed of tilt movement and to the kind of gear used. Its fluid cartridge settings ensure stable videos can be made with any photo lens. Its AdaptoTechnopolymer and Aluminum body make the XPRO fluid head extremely easy to carry: weighing a mere 0.7 kg and supporting up to 4 kg of payload, it introduces a new design approach that enhances video head transportability. The new MHXPRO-2W comes with the Manfrotto 200 pl plate, the most widespread photographic plate, which guarantees a quick setup and a quick switch from photo to video. The XPRO fluid head is made in Italy by Manfrotto.
The GH3750 has been completely revised for improved performance and weight reduction. First of all the panoramic lock, developed with a new concept, is now 3 times stronger than before. The ball lock now features a completely new pat-pending system that combines two locking systems in one. Material magnesiumPanoramic Rotation 360 degreesWeight 0.71 kgLoad Capacity 8 kg
This adapter is made of two pieces: a 5/8' bushing with a 3/8' female attachment to connect it to a tripod and a removable plate 124mm diameter with a 5/8' male thread that should stay connected to the equipment. With the 324 it is possible to transform any Manfrotto tripod into a tripod compatible with the standard attachment interface system used in the survey and measuring industry.
The X-PRO 3-Way Head is Manfrotto’s most compact, precise and reliable 3-way photographic head. The compact closed size that makes the X-PRO so easy to pack and carry is down to its retractable levers that can be extended when needed. With the levers retracted and folded for transport, the space occupied by the head is only 13cm x 13.5cm x 13.5cm (5.1” x 5.3” x 5.3”). Friction controls on the X-PRO 3-Way Head’s tilt and portrait axes help balance the weight of camera equipment so that fine framing adjustments can be made with the locking knobs open, only locking everything down once everything’s ready. And with 3 leveling bubbles on the head, composition can be levelled precisely in-camera, reducing post production work. Sturdily built with a rugged aluminium body for reliability and durability, the X-PRO supports up to 8 kg (17.6 lbs), but weighs only 1 kg (2.2 lbs). The X-PRO 3-Way Head is made in Italy by Manfrotto.
The innovative photo-movie head is developed to simply be the best and most ideal solution for the new HD DSLRs with embedded video functions. With a single product it is possible to take advantage of an extraordinary Photo Head and a Fully Featured video head. The unique Photo-Movie selector makes switching from shooting photos to videos quick and immediate, experiencing the best of both worlds. In Photo mode the head provides the speed and maximum freedom in all directions, like a ball head combined with an incredibly precise, smooth and controlled movement never experienced before, thanks to the fluid cartridges and an adjustable counter balance control. In Video mode a fully featured video head allows for a precise and fluid movement for pan and tilt with all of the typical video settings, including friction control. The pan bar is reversible for right or left hand users and it can quickly be removed and fixed on a tripod leg, thanks to the included rest clip.
The 300N panoramic rotation unit allows the photographer to take sequential constant-angle shots around a single axis, an essential part of achieving accurate and easy-to-stitch panoramic compositions. The set positions of the 300N give ample choice of rotation angle and so of number of photos needed to complete a 360° pan and cover the most common requests of panoramic photographers depending on the camera/lens equipment used. To make angle selection easier, a ''click-stop'' selector screw is included and attached to a safety cable to prevent it from being separated from the head and getting lost. The 300N also comes complete with a secondary locking screw which stops unwanted or accidental rotation of the head when heavy or off-centre equipment makes it less balanced or when the head is used for non-horizontal rotation. The 300N can also be used as a turntable base for object panoramas, or as a means of reading the angle of rotation of camera pan movements in a range of photography. A camera can be mounted on the panoramic unit by adding one of a range of quick release, sliding or fixed plates or a conventional geared, ball or 3-way head.